Hot Sale 2000C PVC Automatic Banner Welder Machine

Product Model: Top-2000CApplication:The automatic welding machine is designed to weld plastic materials. It can weld advertising inkjet fabric, inkjet cloth, light box cloth,PVC banner cloth,plastic cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small,light and easy operation. Product Specification/ModelsModel number Hot Air welder Top-2000C Voltage220V/230VPower2000WFrequency50/60HZWelding temperature20-600°CWorking temperature400degree (normally)Welding area3cmWelding speed1-10m/minWelding material thickness0.2-2mmWelding width30-40mmLe-ister heat gunMade-in ChinaElectric heating1600WMotor30WGross weight19KGPacking size (cm)36*36*56Operation:First, make the picture smooth and tight, take joiner to accurate (about 2-4cm), fixed edges with tape or glue on the ground.Set temperature and walk speed: set temperature and walk speed(according to thickness of banner), in general temperature we set is 350-500 degree Walking speed is around 3-4.Start welding: When the actual temperature display around the expected value of the set temperature fluctuate (between about ± 5°), then start weld,at begin of weld,use one hand to take one banner up,then hold heat gun press heat gun positioning handle,turn heat gun to left and let the nozzle into overlap of the banner,then begin to weld.photo as below:During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by hand.check photo:Finish welding:turn the walking handrail to the right ,machine stop walk,but before cut off the power,we should put the set temperature button to zero.when the actual temperature below 50 degree.we can cut off the main power.or it would damage heat system.Product details:Welding sample: